Ankor Wax rust inhibitor and penetrant

Once applied to bare metal, surface rust, oxidised paint or freshly painted surfaces, Ankor Wax bonds to the surface and penetrates nooks and crannies, to not only inhibit rust, but also provide a tough, long-lasting seal against further damage.

When dry, Ankor Wax is tough, yet pliable, resisting abrasion from road debris and other mechanical damage. It won't crack, chip, peel or flake, and remains sound and intact in all climates.

Unlike some other products, Ankor Wax is clear, clean and very easy to use, too. You can also choose the finish you want - matt, semi-gloss or gloss. Once hardened, it can be buffed to a gloss finish as required. Reapplication is only needed approximately every 12 months if the vehicle is regularly stored outside.

Brushing or spraying (low pressure or airless) Ankor Wax over new paint protects against corrosion, and does the same for old paint, but the clear finish helps to preserve patina. It's also particularly effective in areas where water might sit, like guttering or door bottoms, protecting those vulnerable areas to give you peace of mind.

Ankor Wax is available in 1 litre ($49.00) and 5 litre ($180.00) tins, as well as 205 litre drums.

Contact Busnbug for more details on 1300 669 808 or go to www.busnbug.com